TKS-8 8L
設有油位檢知器,可清楚了解儲油狀況。給油機與風壓出口設有壓力表及風壓表。
  說明

說明/
1. 設有油位檢知器,可清楚了解除油狀況。
2. 給油機與風壓出口設有壓力表及風壓表。
3. 設有多道過濾裝置以保持油品質。
4. 以容積式定量給油,保持油量穩定度。
5. 使用油品黏度:ISO VG 30-68
 
Description
1. The feeder has a sensor for indicating the oil volume.
2. Both of the outlets of oil and air are installed with pressure gages.
3. There are many filters are installed to keep the oil clean.
4. The feeder injects the oil quantitatively to keep the oil supply stably.
5. Viscosity of oil: ISO VG 30~68


 
型式/TYPE TKS-8 TKS-8E TKS-8AE
最大流量/Max.Flow 250cc/min 250cc/min 250cc/min
油壓/ Oil Pressure 2~15kg/c㎡ 12~15kg/c㎡ 12~15kg/c㎡
最高風壓/ Air Max.Pressure 3~5kg/c㎡ 3~5kg/c㎡ 3~5kg/c㎡
浮球開關 Float Swith
油箱 Oil Tank 容量 Capacity 4.6L 8L 4.6L 8L 4.6L 8L
材質 Material 鋁製
Aluminum
鈑金
SheetMetal
鋁製
Aluminum
鈑金
SheetMetal
鋁製
Aluminum
鈑金
SheetMetal
管路壓力訊號裝置
Oil Pipe Pressure Signal
可自由選配 Take Your Choice
釋壓保護裝置
Pressure Protection Devic
潤滑時間
Lubrication Timing(sec)
    1~180sec
 
間歇時間
Intermittent Timing(sec)
    1~180sec(min)
電壓
Voltage(50/60HZ)Single Phase
110v  220v  單相 110v  220v  單相 110v  220v  單相
馬達出力功率
Consumption Power
45W 45W 45W
脫壓裝置(E)
Pressure Relief  Device
 
接頭口徑 Joint Bore 4Φ or  6Φ 4Φ or  6Φ 4Φ or  6Φ
備註 / Remark      


1. 氣壓調整器 Air Pressure Adjustment 8. 風壓表 Air Pressure
2. 潤滑時間 Lubrication Timing 9. 注油口 Oil Inlet
3. 間歇時間 Intermittent Timing 10. 端子座 Terminal Base
4. 電磁閥 Solenoid Valve 11. 進風口 Air Inlet
5. 馬達 Motor 12. 出油口 Oil Outlet
6. 油壓表 Oil Pressure 13. 出風口 Air Outlet
7. 給油鍵 Oil-Feed Key